Wholesale 1350℃ High-Temperature Electric Heating Wire - HRE Alloy by China Suppliers & Factory for Powder Metallurgy Applications Manufacturers, Suppliers
Product Description
PRODUCT INTRODUCTION
APPLICATION DIRECTION
- Clean energy: Solar photovoltaic monocrystalline silicon and polycrystalline silicon heat treatment materials
- Electric heating materials for silicon wafer production and chip heat treatment
- Heat treatment materials for high-end glass (automotive or display glass)
- Urban clean heating and energy storage materials
- Low nitrogen combustion high-performance fiber material:
- Diameter < ϕ0.02mm
- 1050℃ operating temperature
- Oxidation weight gain rate <10% after 200 hours
BASIC PARAMETERS OF PHYSICAL AND MECHANICAL PROPERTIES
| Parameter | Unit | SGHYZ | HRE | 0Cr21Al6Nb |
| Maximum Continuous Operating Temperature | ℃ | 1400 | 1350 | 1350 |
| Nominal Composition (Cr) | % | 21 | 23 | 21 |
| Nominal Composition (Al) | % | 6 | 5.8 | 6 |
| Nominal Composition (Fe) | % | Balance | Balance | Balance |
| Electrical Resistivity (20℃) | Ω·mm²/m | 1.45±0.07 | 1.45±0.07 | 1.45±0.07 |
| Temperature Coefficient (Ct) 800℃ | - | 1.03 | 1.03 | 1.03 |
| Temperature Coefficient (Ct) 1000℃ | - | 1.04 | 1.04 | 1.04 |
| Temperature Coefficient (Ct) 1200℃ | - | 1.04 | 1.04 | 1.04 |
| Density | g/cm³ | 7.1 | 7.1 | 7.1 |
| Specific Heat Capacity | kJ/kg | 0.46 | 0.46 | 0.49 |
| Melting Point | ℃ | 1500 | 1500 | 1500 |
| Tensile Strength | MPa | 680 | 680 | 680 |
| Hardness | Hv | 230 | 230 | 230 |
| Elongation | % | 20 | 20 | 20 |
| Tensile Strength (900℃) | MPa | 35 | 35 | 30 |
| Magnetism | - | Ferromagnetism | Ferromagnetism | Ferromagnetism |
| Emissivity | - | 0.7 | 0.7 | 0.7 |
| Thermal Conductivity (20℃) | W/(m·K) | 13 | 13 | 13 |
PROPERTIES DETAILS
ELEMENT SERVICE LIFE
The rapid test life is the lifespan of the alloy sample wire measured under laboratory conditions according to rapid test standards and methods. China follows the former Soviet Union’s method of evaluating based on cumulative time until burnout with a 2-minute power-on and 2-minute power-off cycle, using a sample size of 0.8 mm in diameter. Generally, alloys with a longer rapid test life also have a longer actual service life.
ELEMENT SURFACE LOAD
A higher surface load results in a higher temperature of the element. Conversely, a lower surface load leads to a lower temperature of the element. When the electrical power is determined, selecting a higher surface load will result in a smaller element size, saving on raw materials. However, the surface load of the element is inversely proportional to its service life. The surface load is related to the material, specification, construction, operating temperature, heat dissipation conditions, environmental atmosphere, support material, and frequency of temperature changes of the electrothermal element.
COLLAPSE RESISTANCE PERFORMANCE
Collapse resistance testing is a method to characterize the high-temperature deformation resistance of large-sized materials.
OXIDATION WEIGHT GAIN RATE
The test involves using materials of the same specification and subjecting them to long-term heating at 1050℃ to measure the oxidation weight gain. (The oxidation weight gain rate data may vary with different specifications and temperatures.)
TEAM
OUR CERTIFICATES
AT THE EXHIBITION
PACKING & DELIVERY
We pack the products in plastic or foam and put them in wooden cases.
If the distance is too far, we will use iron plates for further reinforcement.
If you have other packaging requirements, you can also contact us and we will try our best to meet them.
APPLICATION
COMPANY PROFILE









