China High-Temperature Electric Heating Wire HRE 1350℃ - Quality Resistance Wire from China Suppliers & Factory Manufacturer, Supplier
Product Description
PRODUCT INTRODUCTION
HRE 1350 ℃ high temperature electric heating wire are independently developed by our company, including three brands: 0Cr21Al6Nb, HRE, and SGHZY.
APPLICATION DIRECTION
BASIC PARAMETERS OF PHYSICAL AND MECHANICAL PROPERTIES
HRE 1350 ℃ high temperature electric resistance wire are generally supplied in linear, thick or thin strips. The basic parameters of the physical and mechanical properties of the alloy are shown in the table below.
| Parameter | Unit | SGHYZ | HRE | 0Cr21Al6Nb |
|---|---|---|---|---|
| Maximum Continuous Operating Temperature | ℃ | 1400 | 1350 | 1350 |
| Nominal Composition (Cr) | % | 21 | 23 | 21 |
| Nominal Composition (Al) | % | 6 | 5.8 | 6 |
| Nominal Composition (Fe) | % | Balance | Balance | Balance |
| Electrical Resistivity (20℃) | Ω·mm²/m | 1.45±0.07 | 1.45±0.07 | 1.45±0.07 |
| Temperature Coefficient (Ct) 800℃ | - | 1.03 | 1.03 | 1.03 |
| Temperature Coefficient (Ct) 1000℃ | - | 1.04 | 1.04 | 1.04 |
| Temperature Coefficient (Ct) 1200℃ | - | 1.04 | 1.04 | 1.04 |
| Density | g/cm³ | 7.1 | 7.1 | 7.1 |
| Specific Heat Capacity | kJ/kg | 0.46 | 0.46 | 0.49 |
| Melting Point | ℃ | 1500 | 1500 | 1500 |
| Tensile Strength | MPa | 680 | 680 | 680 |
| Hardness | Hv | 230 | 230 | 230 |
| Elongation | % | 20 | 20 | 20 |
| Tensile Strength (900℃) | MPa | 35 | 35 | 30 |
| Magnetism | - | Ferromagnetism | Ferromagnetism | Ferromagnetism |
| Emissivity | - | 0.7 | 0.7 | 0.7 |
| Thermal Conductivity (20℃) | W/(m·K) | 13 | 13 | 13 |
TECHNICAL PERFORMANCE DETAILS
The rapid test life is the lifespan of the alloy sample wire measured under laboratory conditions according to rapid test standards and methods. China follows the former Soviet Union’s method of evaluating based on cumulative time until burnout with a 2-minute power-on and 2-minute power-off cycle, using a sample size of 0.8 mm in diameter. Generally, alloys with a longer rapid test life also have a longer actual service life.
A higher surface load results in a higher temperature of the element. Conversely, a lower surface load leads to a lower temperature of the element. When the electrical power is determined, selecting a higher surface load will result in a smaller element size, saving on raw materials. However, the surface load of the element is inversely proportional to its service life. The surface load is related to the material, specification, construction, operating temperature, heat dissipation conditions, environmental atmosphere, support material, and frequency of temperature changes of the electrothermal element.
Collapse resistance testing is a method to characterize the high-temperature deformation resistance of large-sized materials.
The test involves using materials of the same specification and subjecting them to long-term heating at 1050℃ to measure the oxidation weight gain. (The oxidation weight gain rate data may vary with different specifications and temperatures.)
TEAM
SPARK "brand spiral wire is well-known all over the country. It uses high-quality Fe-Cr-Al and Ni-Cr-Al alloy wires as raw materials and adopts high-speed automatic winding machine with computer control power capacity. Our products have high temperature resistance, fast temperature rise, long service life, stable resistance, small output power error, small capacity deflection, uniform pitch after elongation, and smooth surface. It is widely used in small electric oven, muffle furnace, air conditioner, various ovens, electric heating tube, household appliances, etc. We can design and manufacture all kinds of non-standard helix according to user's requirements.
OUR CERTIFICATES
AT THE EXHIBITION
PACKING & DELIVERY
APPLICATION
COMPANY PROFILE
Beijing Shougang Gitane New Materials Co., Ltd. (originally known as Beijing Steel Wire Plant) is a specialized manufacturer, with a history of over 50 years. We are engaged in producing special alloy wires and strips of resistance heating alloy, electrical resistance alloy, and stainless steel and spiral wires for industrial and domestic applications. Our company covers an area of 88,000 square meters, including 39,268 square meters of workroom. Shougang Gitane has 500 employees, including 30 percent of employees on technical duty. Shougang Gitane attained ISO9001quality system certification in 2003.









